90 Degree Ep/Nn Sidewall Conveyor Belt Supplier

• Type: EP200
• Material: Rubber
• Inside Material: Fabric
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Warp: Polyester
• Model NO.: XE, XE+1, XE+2
• Weft: Nylon-66
• No.of Plies: 2-6
• Belt Width: 300-2200mm
• Cover Thickness Top: 1.5-18mm
• Cover Thickness Bottom: 0-10mm
• Powdery: Flour,etc
• Loose Rolling: Corn,Barley,Wheat,Rey,etc
• Packed: Sacks,Paper Sacks,etc
• Stick: Wet Sand,Ash,Wet Loam,etc
• Application: Coal,Metallurgical
• Transport Package: PE Bag
• Specification: 300~2000 width
• Trademark: TRX
• Origin: China
• HS Code: 4010120000
• Production Capacity: 50000m/Month

Product Description

 

Product Description

Structure:
It uses the new type steel cable as the tension element. On one side or two sides vertical that is perpendicular to the lengthways steel cable, evenly lay the reinforcing layer of the steel cable, steel.
Steel Cord Conveyor Belt has High tensile strength, low extensibility, small used transmission pulley diameter, uniform steel wire rope tension, excellent troughbility and good adhesive between rubber and steel wire.
Type:
According to the cover property, it can be divided into the following types: general type,fire-retardant type for coal mines, general-purpose fire-retardant type, cold resistant type,wearable type, heat resistant type, acid-alkali resistant type, oil resistant type, etc.

Outstanding features

• Quick installation
• Reduced number of transfer points
• Long service life
• Reduced power requirements
• Quiet running
• Reduced maintenance
• Environmentally friendly

What do you need to know to get a sidewall conveyor belt quote?

• Conveyor belt sidewall height
• "A" - Indent of sidewall: measured from outside edge of the belt to the outside edge of the sidewall.
• "B" - Conveying area: the distance between the insides of both sidewalls, measured from one inside edge to the other inside edge.
• "C" - Corrugation width: measured from the inside edge of the sidewall to the outside edge of the same sidewall.
• "D" - Corrugation pitch: the distance between the center of each sidewall, measured from the center of one corrugation to the center of the next corrugation.
• "E" - Cleat gap (optional: for applications that have cleats present on the belt): the distance between the cleat and the sidewall, measured from inside of the sidewall to the edge of the cleat.

 

 

 

 

Detailed Photos

 

 

Product Parameters

 

GB/T 7984
DIN 22102
JISK 6322
AS 1332-2000
SANS 1173:2005
BS 490

 

Carcass	fabric type	Strength per ply (N/mm)	Thickness per ply (mm)	Cover Thickness (mm)		No.of Ply	Belt Width (mm)	Length per Roll (m/Roll)
				Top Cover	Bottom Cover
NN	NN100	100	0.70	3 3 3.2 4 4.5 4.8 6 6 6.4 7.9 8 9.5	1.5 3 1.6 2 4.5 1.6 2 6 3.2 3.2 4 3.2	2-10	300-12000	20-100
	NN125	125	0.70
	NN150	150	0.75
	NN200	200	0.90
	NN250	250	1.15
	NN300	300	1.25
	NN400	400	1.50
EP	EP100	100	0.75			2-8
	EP125	125	0.75
	EP150	150	0.85
	EP175	175	0.85
	EP200	200	1.00
	EP250	250	1.20
	EP300	300	1.35
	EP350	350	1.50
	EP400	400	1.65
	EP500	500	2.00
CC	CC56	56	1.10			3-12

 

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
DIN 22102	Mpa	%	mm3	N/mm	N/mm  (>1.5mm)	N/mm
DIN 22102-Z	15	350	250	3.5	4.5	5
DIN 22102-W	18	400	90	3.5	4.5	5
DIN 22102-Y	20	400	150	3.5	4.5	5
DIN 22102-X	25	450	120	3.5	4.5	5

 

rds	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm   (≤1.6mm)	N/mm  (>1.6mm)	N/mm
RMA-I	17	400	200	3	4.4	4
RMA-II	14	400	250	3	4.4	4

 

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
AS 1332	Mpa	%	mm3	N/mm       (≤1.9mm)	N/mm  (>1.9mm)	N/mm
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6

 

 

Certifications

Packaging & Shipping

 

 

Company Profile

Hebei TRX Rubber Products Co., Ltd is a leading professional manufacturer of conveyor belts & conveyor accessories in China. The main workshops cover 20,000 square meters in the total 60,000 square meters of the plant. The applied technology and equipment in the advanced production lines are state of the art in the industry. The sales headquarters is located in the capital of China, Beijing with branches in domestic and abroad.

It specializes in following three series: 1) Heavy-duty Conveyor Belt, including universal EP/NN and CC Belt, Chevron Belt, Oil Resistant Belt, Abrasion Resistant Belt, Heat Resistant Belt, Fire Resistant Belt, Chemical Resistant Belt, Sidewall Belt, Flat Transmission Belts, 2) Rubber Sheets, including SBR, NBR, NR, CR, EDPM, Rubber With Insertion 3) Conveyor accessories. These three series of products conform to RMA, DIN, ASTM and ISO specifications.

Its products, honored with "The most Advanced level of Products" by the Committee of Science and Technology, have been widely used in mining and quarrying, power stations, steel plants, bulk cargo terminals, cement industry, and other material handling fields. With great success in domestic market, it has been focusing on global market with several hundreds of foreign valued customers in Asia, South America, North America, Africa and Europe.

The company mission:
1.Supply one-stop outstanding service to global customers.
2. Engage in complete solutions with conveyor belting and power transmission belting.
3. Persist in technology improvement and quality control in the whole process of production and service.

After Sales Service

 

FAQ